INATEC – DO-7013 Electrochemical Dissolved Oxygen Sensor

INATEC – DO-7013 Electrochemical dissolved oxygen sensor is widely used in Aquaculture, water quality testing, informational data collection, IoT water quality testing etc.

Characteristics

Range : 0 – 20 mg/L.

Resolution : 0.01 mg/L.

Output signal : RS485.

Communication protocol : MODBUS – RTU.

Tokopedia

Introduction

Intelligent module communication protocol Introduction.

Communication port : RS485.

Port setting : 9600, N, 8, 1 (By default).

Device address : 0 x 01 (By default).

Protocol specifications : Modbus RTU.

Commands support : 0 x 03 read register.

OX06 write register | 0 x 10 continuous write register.

Specification

Information	Spesification
Measurement	DO Value In Water
Measure range	0 ~ 40.00 mg / l
Resolution	0.01 mg / l
Temperature range	-20 ~ 60 °C
Type of sensor	Galvanic cell sensor
Measuring accuracy	< 0.5 mg / l
Output mode	RS485 port * 1
Communication protocol	Compatible with standard MODBUS-RTU protocol
Communication mode	RS485 9600, 8, 1, N (By default)
ID	1 ~ 255 Default ID 01 (0 x 01)
Fixing method	RS485 remote setting calibration and parameters
Power supply mode	12 VDC
Power consumption	30 mA @ 12 VDC